Use Code NAUTOSVIP and get an extra 5% discount at checkout. |||| Due the weather condition in our area same delivery delay may occur.

NAVIGATION LIGHT- OP5001 - AMAZONIA MIRIM III - CLASSIC- INTEGRATE BI-DIMENSIONAL LIGHT 5 IN 1

Product Description
Optolamp Amazonia Mirim Compact 5 in1 LED Navigation Light
Tri-colour navigation light
Anchor light
Strobe light
Fast Strobe light
Bi-Dimensional vertical beam for emergency situations with a range of 4.3 NM.
Consumes 16 times less energy than a conventional light.
The development and design of the OPTOLAMP® product line was based on the requirements of round the world sailing events such as the Vendee Globe and Route du Rhum, where low energy consumption and reliability in all weather conditions is essential.
 Amazonia Mirim III Compact 5 in1 LED Navigation Light
Tri-colour navigation light
Anchor light
Strobe light
Fast Strobe light
Bi-Dimensional vertical beam for emergency situations with a range of 4.3 NM.
Consumes 16 times less energy than a conventional light.
The development and design of the OPTOLAMP® product line was based on the requirements of round the world sailing events such as the Vendee Globe and Route du Rhum, where low energy consumption and reliability in all weather conditions is essential. The development of the new compact model
Amazonia Mirim is the result of 12 years experience in LED navigation lights.
The Amazonia Mirim features TDPS System (True Dual Power Supply). Two power sytems in one: a system for the anchor light and another one for the independent tri-colour light give the redundancy required for peace of mind. The electronic controller circuit is sealed for life by encapsulation in resin providing moisture, shock and vibration proofing for the life of the unit. Maximum light intensity is achieved even with discharged batteries. Maximum stable light intensity within a voltage range from 10.6V to 14,4V and a reduced output as low as 9.5V. It can work approximately 44 nights with a 12V/75A battery. The latest generation of electronic circuit protects against tension peaks in the boat’s electrical system as well as reverse polarity. A photo sensitive cell switches on-off automatically at dawn, at night and during storms or fog (Anchor Light and Strobe functions only).
Simple installation with very low gauge wire, the standard anchor light 2 core wire provides both nav and anchor light functions allowing upgrade to 3 or 4 core wire when convenient.
2 core wire provides anchor light and nav light functions by ingeniously reversing the connections with the included mode selection switch.
3 core wire provides nav, anchor light and strobe
4 core wire adds the fast strobe option
See the Multi-Core Thin Walled Cable for 3 and 4 core small diameter cable.
Technical Information:
Height: 130 mm
Weight: 220 grams
Installation base: Anodized Aluminium (60mm x 80mm)
Power source: 10,6V to 14,4V (12v Version)
Consumption: (12V) UBC® Ultra Low Consumption - Anchor Light: 0,126A to 0,156A - NAV Light: 0,156A
Light source: Electronic emission
LED-Lamp Life: 50000 Hs
Lens: Polycarbonate, UV protection
Horizontal Range: 2,0
Vertical Range: up to 4,3 NM
Maximum Light intensity: between 10,6V and 14,4V (start at 9,5V)
Maintenance free: Led lights don’t have a filament to break or burnt out
Fully sealed for life. Shock and Vibration proof. WARRANTY: 2 years
$398.94